In order to communicate directly Ethernet port of SATEC POWER Meter<->PC, you should set in Local Area Connection of the PC compatible IP address.

 

For example: IP address in EM920 is:

192.168.0.203.

Subnet Mask 255.255.255.0

Default Gateway 192.168.0.1

 

In that case set in Local Area Connection in your laptop:

192.168.0.200

Subnet Mask 255.255.255.0

Default Gateway 192.168.0.1 is not required.

 

  1. Open Control panel in your Windows and go to Control Panel\Network and Internet\Network Connections

cid:image001.png@01D6974A.4B24DF10

 

Click the right button and on relevant connection and choose Properties.

 

cid:image008.png@01D6974B.44FD7150

 

Select Version 4 and click Properties

cid:image009.png@01D6974B.44FD7150

 

Set IP address and Subnet Mask and click OK and then klick OK on previous window too.

cid:image010.jpg@01D6974B.44FD7150