PM180
When the "Delta" condition is set in the operator trigger, the comparison of the current parameter value is performed with the last value of this ...
Tue, 23 May, 2017 at 9:59 PM
1. Как устроен процесс спорадической передачи данных из регистров усредненных значений? Ответ: Как следует из названия, и в отличие от периодической пере...
Mon, 17 Jul, 2017 at 5:42 PM
Для индикации локального времени PAS пользуется функциями стандартных библиотек Microsoft Visual C++, которые устанавливаются на компьютере при установке PA...
Mon, 17 Jul, 2017 at 5:46 PM
Indication: PM180 or BFM II in Service Mode Service Mode is used for local upgrading of device's firmware. When the device enters Service Mode, t...
Tue, 23 Jun, 2020 at 12:43 PM
PM180 Fault Locator - Application Note
Mon, 31 Jul, 2017 at 1:31 PM
In order to format memory of historical data in the device: 1) Connect the PM180 by to TCP/IP port. 2) RUN CMD (Command Line console) in your comput...
Thu, 8 Aug, 2019 at 2:15 PM
Power/Energy/PQ metering
Fault recorder
Options
Nominal/Maximal current
Maximal Current
Accuracy class
Direct 1A
1A/4A
10A
0.2S
Direct 5A
5A/20A
...
Mon, 2 Oct, 2017 at 3:58 PM
In April 2016 was upgraded NAND memory in PM180. Memory chip Toshiba was replaced by memory Micron. Color of CPU cardNAND memory manufacturerBlueMic...
Tue, 14 Aug, 2018 at 2:23 PM
Starting from second half of Year 2017 SATEC began to fabricate new versions of mother boards: N1. Model with 1MOhm voltage input impedance. N2. N1 ...
Thu, 2 Aug, 2018 at 3:27 PM
Starting from firmware version V31.XX.29 supported new module 8DI/4DO (Combo) Note: IMPORTANT! Whenever 16DI and 8DI/4RO modules are used in same instal...
Tue, 2 Apr, 2019 at 9:58 AM