General measuring issues

Demand Measurements (block, sliding, thermal, accumulated and predicted demand)
Block Interval Demand Block interval demand calculations are completed at the end of each subsequent demand interval, and the result is used as the new pre...
Tue, 4 Jul, 2017 at 12:59 PM
Optimization recording historical data in SATEC devices
Short period (less than 1 minute) of recording data logs is not recommended. Such application might short live time of memory in power meter, complicated t...
Thu, 15 Feb, 2018 at 11:53 PM
Neutral current calculation
Mon, 16 Apr, 2018 at 10:48 AM
TDD calculation according to Standard IEEE-519
As default Maximum Demand Current is being taken from CT Primary Current definition. Use PAS to customize this definition in SATEC device. Choose ...
Thu, 17 May, 2018 at 4:32 PM
Voltage and current unbalance calculation
Mon, 21 May, 2018 at 1:06 PM
THD (Total Harmonic Distortion) and TDD (Total Demand Distortion) computation
THD and TDD computation The TOTAL HARMONIC DISTORTION (THD) factor is used as a measurement indication of the signal deviation from the pure sine wave. ...
Thu, 9 Aug, 2018 at 10:33 AM